Description
Description:
- Horsepower & Torque: 415 Horsepower / 415 ft. lbs. Torque
- Compression Ratio: 10.0:1
- BluePrint Engines Aluminum Heads
- BluePrint Engines Hydraulic Roller Cam
- BluePrint Forged Pistons
- BluePrint Engines Cast Crank
Block:
- BluePrint Engines High Strength Cast Iron Block
- Increased Deck Thickness & Strength Webbing
- Improved Water Jacket Design
- 1-Piece Rear Main Seal
- Priority Main Oiling
- 4.000″ Bore
- 4-Bolt Main
Rotating Assembly:
- Cast Crank
- 3.400″ Stroke
- Forged 5.400″ Connecting Rods
- Forged Pistons
- 28oz Externally Balanced Front and Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – HP9009
- 60cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 190cc Intake / 60cc Exhaust Runners
Cam Specs:
- Hydraulic Roller Cam
- .543 Intake / .554 Exhaust Lift
- 218 Intake / 226 Exhaust Duration
- @.050-112 Degree Lobe Separation
Ignition Timing:
- 34 Degrees Total at 3500 RPM
Also Includes:
- Front Accessory Drive with A/C Compressor, Power Steering Pump, Alternator, and Water Pump
- Holley Street Warrior 600cfm Vacuum Secondary Carburetor w/ Electric Choke – BPP080457SA
- Dual Plane Satin Aluminum Intake Manifold – BPP302INT
- Thermostat and Thermostat Housing
- Pro Billet Distributor – BPP3023BK
- Ignition Coil – BPP82021BK
- Mustang Style Valve covers
- Harmonic Balancer
- Electric Fuel Pump
- 7 Quart Oil Pan
- Air Cleaner
Assembled with Complete 4R70W Automatic Transmission Package:
- Includes Electronic Transmission Controller
- Transmission Built to 650 HP
- 2200-2600 Stall Torque Converter
- Flex Plate
- Starter
- 4 Speed, Overdrive Transmission w/Lockup
- GEAR RATIOS
- First: 2.84 :1.
- Second: 1.55 :1.
- Third: 1.00 :1.
- Overdrive: 0.70 :1.
- Reverse: 2.32 :1.
Notes:
- Does not include TPS, as varies with carb or EFI type.
- The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
- Note that 4R70W transmission may require modifications/replacement of driveshaft, transmission mount, exhaust routing, etc.
- Package Ships assembled as pictured.
- IF THIS IS BEING ORDERED FOR A FACTORY FIVE VEHICLE, STOP AND CALL US AT 1-800-483-4263 FOR PROPER FITMENT OR VISIT FACTORYFIVEENGINES.COM
