Description
Description:
- Horsepower & Torque: 750 Horsepower / 690 ft. lbs. Torque
- Compression Ratio: 10.0:1
- BluePrint Engines Aluminum Heads
- BluePrint Engines Hydraulic Roller Cam
- BluePrint Engines Forged Crank
- BluePrint Engines Forged Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Manufactured and Machined in the USA!
- Tall Deck (Cylinder Deck is Approx .400 taller / wider than OEM block)
- Mech Fuel Pump Provision: Yes
- 1-Piece Rear Main Seal
- 4-Bolt Main
- 4.500″ Bore
Rotating Assembly:
- BluePrint Forged Crankshaft
- 4.500″ Stroke
- Forged H-beam 6.535″ Connecting Rods
- Forged Pistons
- Internally Balanced Front and Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – PS8012
- 119cc Chamber
- 2.30″ Intake / 1.88″ Exhaust Valves
- 358cc Intake / 125cc Exhaust Runners
- Cylinder Heads Feature a .300 in. Raised Exhaust Port vs an OEM Casting
- Must Verify Clearance of Exhaust / Headers
Cam Specs:
- Hydraulic Roller
- .698 Intake / .698 Exhaust Lift
- 272 Intake / 282 Exhaust Duration
- @ .050-110 Degree Lobe Separation
Also Includes:
- Front Accessory Drive with Alternator, A/C Compressor, Power Steering Pump, and Water Pump
- Pro Series Ready Run Distributor – BPP3503BK
- Intake Manifold – BPP572632INT
- Harmonic Balancer – BPP454I
- 1250cfm Holley Carburetor
- Spark Plugs and Wires
- Timing Cover
- Valve Covers
- Oil Pan
Notes:
- Not for use in pollution-controlled vehicles.
- This engine features .300 raised exhaust ports and .400 deck height increase over OEM.
- Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.
-
The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
